DCGM 62 T50 (DC-Motors)
DCGM 62 T50 (24 V - 068 U - 054 Nm)
Order no.: 606018
Voltage: | 24,0 V |
No load speed: | 68 1/Min |
Max. torque: | 54,00 Nm |
Gear ratio: | 69:1 |
Hall-Sensor: | no |
1 -
10
of
13
Variants
Item | Quantity | Voltage | No load speed | Max. torque | Gear ratio | Hall-Sensor | Gearbox position | |||
---|---|---|---|---|---|---|---|---|---|---|
|
606006 |
|
12,0 V | 19 1/Min | 15,00 Nm | 69:1 | no | right | ||
|
606052 |
|
12,0 V | 51 1/Min | 44,00 Nm | 69:1 | no | left | ||
|
606026 |
|
24,0 V | 20 1/Min | 21,00 Nm | 69:1 | no | left | ||
|
606053 |
|
24,0 V | 45 1/Min | 34,00 Nm | 55:1 | no | right | ||
|
606030 |
|
24,0 V | 51 1/Min | 51,00 Nm | 69:1 | no | right | ||
|
606024 |
|
24,0 V | 51 1/Min | 61,00 Nm | 69:1 | no | left | ||
|
606036 |
|
24,0 V | 51 1/Min | 61,00 Nm | 69:1 | no | left | ||
|
606018 |
|
24,0 V | 68 1/Min | 54,00 Nm | 69:1 | no | right | ||
|
606039 |
|
24,0 V | 75 1/Min | 26,00 Nm | 53:2 | no | left | ||
|
606034 |
|
24,0 V | 136 1/Min | 38,00 Nm | 53:2 | no | left |
SERIES DCGM 62 T50 |
Motor: Type: permanently excited DC motor Commutation: brushed Motor housing: Sheet steel, deep-drawn, painted Ø Motor: 64 mm Bearing: Ball bearing/slide bearing |
Gear: Gear type: Worm gear Gear housing: Zinc-cast Ø Mounting: 50,8 mm Gear wheel: Plastic Lubrication: Grease, permanent lubrication |
General: Operating mode: Short time operation (S2) Operating temperature: -20°C up to +80°C Direction of rotation: anticlockwise/clockwise Protection class: IP30 |
|||
For series applications, customer-specific adaptations are possible within the framework of the technical production conditions - please contact us if you have any requirements.