DCSA 36 (24V - 010 mm/s)

Order no.: 600156

Voltage: 24,0 V
Speed: 10 mm/s
Max. Torque: 2.100 N
Hall-Sensor: yes
No. of pulses: 2
prices on application
  • In stock: 77 St.


    1 - 8 of 8 Variants
    Item Quantity Voltage Speed Max. Torque Hall-Sensor No. of pulses
    600054 24,0 V 5 mm/s 1.700 N no -
    600056 24,0 V 10 mm/s 2.100 N no -
    600053 24,0 V 18 mm/s 700 N no -
    600055 24,0 V 40 mm/s 800 N no -
    600154 24,0 V 5 mm/s 1.700 N yes 2
    600156 24,0 V 10 mm/s 2.100 N yes 2
    600153 24,0 V 18 mm/s 700 N yes 2
    600155 24,0 V 40 mm/s 800 N yes 2

     

      SERIES DCSA 36 without ACME-Screw
               
      Motor:
    Type: permanently excited DC motor
    Commutation: brushed
    Motor housing: Sheet steel, galvanised
    Ø Motor: 37 mm
    Bearing: Slide bearing/Ball bearing
      Gear:
    Gear type: Spur gear / 12:1 or 50:1
    Gear housing: Zinc-cast
    Gear material: Steel
    Screw nut: Plastic for ACME-Screw TR 10x3 mm
    Lubrication Gear: Grease, permanent lubrication
    Lubrication Screw: by customer, recommended OKS 400
      General:
    Operating mode: Short time operation (S2), intermittent (S3)
    Duty cycle: 30% - 80%
    Operating temperature:
    Direction of rotation: anticlockwise/clockwise
    Protection class: IP20
    Electrical connection: Plug flags 4,8 x 0,5 mm/Molex-connector
    All variants also available with encoder
               

    Matching Accessories

    ACME-Screw 10x3 Stroke=50mm
    ACME-Screw 10x3 Stroke=50mm
    ACME-Screw 10x3 Stroke=100mm
    ACME-Screw 10x3 Stroke=100mm
    ACME-Screw 10x3 Stroke=150mm
    ACME-Screw 10x3 Stroke=150mm
    ACME-Screw 10x3 Stroke=200mm
    ACME-Screw 10x3 Stroke=200mm
    ACME-Screw 10x3 Stroke=250mm
    ACME-Screw 10x3 Stroke=250mm
    ACME-Screw 10x3 Stroke=300mm
    ACME-Screw 10x3 Stroke=300mm
    ACME-Screw 10x3 L=1000 mm
    ACME-Screw 10x3 L=1000 mm
    DCSA36-AK50
    DCSA36-AK50
    DCSA36 - Montagesatz
    DCSA36 - Montagesatz

    Your last viewed items